Abstract Two quinoxalinone derivatives, namely 3- (p-tolyl)-3.4-dihydroquinoxalin-2-(1H)-one (Q1) and 3-(4-chlorophenyl)-4-methyl-3.4-dihydroquinoxalin-2-(1H)-one (Q2), were used and investigated as potential corrosion inhibitors for OS in a 1 M HCl solution, at C from 10-6 to 10-3 M, using PDP, EIS measurements and GQCD calculations. EIS results indicate that Q1 and Q2 IE(%) increased with higher C and reached maximum values of 86.2 and 92.5%, at 10-3 M, respectively. The inhibitors adsorption mechanism onto the OS surface was found to obey the Langmuir’s adsorption isotherm model. PDP data displayed that Q1 and Q2 acted as mixed inhibitors, predominantly of the cathodic type. The theoretical results showed that the obtained parameters were in good agreement with the experimental data. Q2 compound had better IE(%), due to the inductive effect of CH3 electro-donor group in dihydroquinoxaline position.

Abstract In the present work the influence of the two organic inhibitors, namely : phenyl (2- (3,4,5 trimethoxyphenyl) -1H-benzo [d] imidazol-1-yl) methanone (P3) and ( 2- (4 -methoxyphenyl) -1H-benzo [d] imidazol-1-yl) (phenyl) methanone (P4) on the ordinary steel corrosion in 5.0 M HCl solution was investigated by using electrochemical measurements, scanning electron spectroscopy (SEM) coupled with Energy Dispersive Spectroscopy (EDX), UV-visible spectroscopy and theoretical study. The obtained results showed that these compounds act as mixed inhibitors. It is obtained that the inhibition efficiency increases with their concentrations and reaches 97.0% and 91.3% at 10−3 M of P3 and P4, respectively. These findings were confirmed by the electrochemical impedance spectroscopy measurements, where the transfer resistance values increase with the concentrations. In addition, the effect of temperature range from 298 K to 328 K was investigated and indicated that P3 and P4 keep their performance at height temperature. Moreover, density functional theory explained the relationship between the molecular structure of imidazole derivatives and inhibition performance obtained experimentally. Additionally, the morphological surface and EDX analyses indicated that these compounds act by the formation of a protective layer on the ordinary steel surface. In order to confirm the possibility of the formation of P3-Fe and P4-Fe complexes, the UV–Visible absorption spectra was used. The obtained results indicated the formation of a complex between Fe2+ and molecules inhibitors.

Abstract The corrosion inhibition of newly synthesized Schiff base derivatives, namely (E)-3-(1-((2-aminophenyl)imino)ethyl)-4-hydroxy-6-methyl-2H-pyran-2-one (FMO), (E)-3-(1-((3-aminophenyl)imino)ethyl)-4-hydroxy-6-methyl-2H-pyran-2-one (FMM), and (E)-3-(1-((4-aminophenyl)imino)ethyl)-4-hydroxy-6-methyl-2H-pyran-2-one (FMP) was investigated for mild steel, in a 1.0 M HCl medium, using weight loss, electrochemical impedance spectroscopy, potentiodynamic polarization and theoretical calculations. FMO, FMM and FMP inhibition effectiveness increased with higher inhibitors concentrations, and decreased with a rise in temperature. Polarization studies showed that FMO, FMM and FMP were of mixed type nature. The results obtained from AC-impedance technique were analyzed to model the corrosion inhibition process through a suitable equivalent circuit model, where a constant phase element (CPE) has been used. FMO, FMM and FMP were found to obey Langmuir adsorption isotherm and Kinetic-Thermodynamic Model of El-Awady. Quantum chemical calculations were used to provide molecular based explanations for FMO, FMM and FMP inhibitive effects. Monte Carlo simulation studies and experimental results were in good agreement.

Abstract This work consists in applying and studying the new pentafunctional phosphoric polymeric architecture - pentaglycidyl ether pentaphenoxy phosphorus (PGEPPP) - on the behavior of its coating, in a marine environment. First, we applied the new macromolecular pentafunctional epoxide (PGEPPP) binder, crosslinked by methylene dianiline and formulated by a natural phosphate, to E24 carbon steel, in the presence of two formulations, F1 (PGEPPP/MDA) and F2 (PGEPPP/MDA/PN). Then, we have studied the behavior of the anticorrosive coating on the metal substrate, in 3.5% NaCl. Indeed, the gravimetric, stationary and transient electrochemical studies of the composite (PGEPPP/MDA/PN) are very interesting and reach maximum values which are equal to 94%, 95% and 91%, respectively. We then proceeded to the prediction of the quantum parameters of the new pentafunctional phosphorus epoxy resin; these parameters were calculated according to the method of the Theory of Functional Density (DFT), at the level of 6-311 G (d,p) basis sets. Finally, the results obtained by the Monte Carlo simulation are in very good agreement with the data of the DFT theory and with the experimental data.